Wastewater treatment process
ACO Remosa has different technologies for the treatment of wastewater.
In the case of large installations, design consultants should be called on to recommend the best treatment considering the many factors involved. Our technical department accompanies you.
Wastewater treatment Products
Compact domestic waste water treatment plant using sludge activated with a culture fixed on a fluidised bed
System for the biological treatment of aerobic wastewater with fixed culture in two phases
Closed tank in which sludge is in direct contact with domestic wastewater passing through the structure. Solid organic matter is partially decomposed by the action of anaerobic bacteria.
Closed tank in which sludge is in direct contact with domestic wastewater passing through the structure. Solid organic matter is partially decomposed by the action of anaerobic bacteria.
The Imhoff tank is a combined anaerobic biological pretreatment tank. The sedimentation (in the top part) and the anaerobic digestion of the organic material on the bottom take place in the same dual-compartment unit.
Bacterial beds of a specific mass of material (50 to 160 m2Ā· m-3) serving as substrate for the microorganisms that form a film of variable thickness on it. They represent an extra treatment to the septic tanks, obtaining higher treatment performances.
This unit is the best wastewater storage solution when the ground characteristics or authorities’ requirements make it impossible/illegal to discharge wastewater into the environment. This is collected in the tank and when it is full it must be emptied.
This accessory is designed to retain and separate bulky floating bodies and bodies in suspension retained by the waste water. The voluminous matter and other floating waste are trapped and retained by the grill. These solids must be collected manually from the draining basket using a rake.
Specially designed for solid-liquid separation, performing this by means of a continuous rotation system. The filtering cylinder is cleaned automatically by counter-current rinsing.
Specially recommended for pretreatment of more than 200 EH, for the separation of solids present in wastewater and their subsequent transportation.
The vertical rotary sieve is made in stainless steel ASI304. To facilitate its installation, it is installed in an FRP tank with no need for a concrete channel. The sieve separates the solids present in the wastewater.
The stainless steel separators are manufactured in accordance with European technical standard EN 1825 and German technical standard DIN 4040.
The fats separator is an essential component in the treatment of household wastewater that may contain a considerable volume of fats or animal or vegetable origin. Built in accordance with standard NF EN 1825-1.
Good sampling is essential for proper control of the efficiency of the treatment units.
An essential feature in urban and industrial wastewater treatment is the secondary decanter.
The ACO Remosa pumping stations are prefabricated units designed to evacuate wastewater from buildings located below sewer level, where it cannot be transferred by gravity.
PARSHALL-type flow meter in open channel with ultrasound flow gauge. This is an instrument that measures the average speed of the effluent at the inlet or outlet of the treatment plant.
Closed tank in which sludge is in direct contact with domestic wastewater passing through the structure. Solid organic matter is partially decomposed by the action of anaerobic bacteria.
Do you need more info? Contact us!