FRP Fats separator

They must be installed in hotels, restaurants, camp sites, schools, etc. ACO Remosa has standard units of up to 5,000 litres, and higher capacities available on request.

DETAILS
The water can be separated from the fat due to their different densities. The separation is done in two phases: the fats rise to the surface and the water stays on the bottom. The effluent is collected in the intermediate part, thus preventing the fats leaving. The fats separator must be preceded by a desander that will retain the sludge and sand. The effluent containing the fats must be channelled separately from the sewage discharge.

Separador de grasas en INOX

Animal fats and vegetable oils cannot be poured into the sewers as they would clog the pipes over time. It is especially prohibited and places where these substances are used must be equipped with structures for the separation of fats. Water enters the separator through an elongated baffle that allows a slow and even distribution of the incoming flow. Fats and oils separate and rise to the surface by gravity. Throughout operation, a floating layer is generated that increases in thickness. When the maximum volume is reached
storage fats must be removed. They can be installed in restaurants, cafeterias, pizzerias, hotel kitchens, etc. Its installation is simple and fast, without the need for civil works. Dividers can be installed directly under countertops.